Hello All
Right now my 5ghz Width setting is locked on 20/40/80 setting is there a way to get it possibly unlocked to be able to use 20/40/80/160 setting so wifi 6 devices get the max speed?
I don't care if Xfinity manages the channel autoly and such, right now all settings are managed, even though don't have xfinity pods--just 1 wireless tv box for upstairs TV
Advice? suggestions? should i factory reset it when i got time, and setup manually with Laptop, or would it be a waste of time
↧
[WiFi] Getting Width Setting set properly on XB7-T Gateway
↧
New versions of Arris s33 and sb8200
Looking through cablelabs certification list there're arris s33v2 and sb8200v2, looks to be different from hardware versions which sb8200 already has 7? I was wondering if anyone knows if these v2 versions are already out and what's the difference between v1 and v2, and also if they are out how to get it, do you just buy new s33 and hope its v2?
p.s also looks like netgear cm2500, cm3000 and cm3050 are coming out.
↧
↧
[Speed] Are gigabit tier subscribers seeing a full 1440 Mbps max speed?
Re: https://www.dslreports.com/forum/r33000856-Gigabit-speed-incrase
Re: https://www.dslreports.com/forum/r33091376-Gigabit-speed-upgrade-in-WA-state-on-4-22
Now that Comcast has recently increased the Gigabit speed tier to 1200/35 (1440/42 as overprovisioned), if you subscribe to that tier, what are the actual speeds that you are seeing and what device (multi-gig modem/gateway using LAG/LACP or 2.5GigE port) and router are you using to achieve that?
↧
Webmail and moving?
My in laws refuse to move away from isp webmail and they’re moving to an area out of coverage.
I’m trying to set them up with gmail so hoping I could get their email forwarded. Was hoping if anyone knew what happens when you move. Does your webmail shut down? Will the emails still forward elsewhere?
↧
What?s going on here?
Speed tests been weird lately. Decided to look at the modem page. This… what is going on?
↧
↧
[Speed] Can Netgear CM600 get new Blast 600 mbps speeds?
I rebooted my modem today and got the new faster download and upload Blast speeds, but I’m unable to get a speed test faster than around 548 mbps.
I’ve tested several devices, primarily over Wi-Fi, but my ASUS RT-AC88U reported a 802.11ac link speed of 860/860 which should be fast enough. That router is rated up to several gbps. I’ve read the CM600 supports up to 960 mbps, so something else must be going on.
Signals looks great though. Should I expect to get the 600 mbps download speeds?
1 Locked QAM256 17 549000000 Hz -2.4 dBmV 41.2 dB 0 0
2 Locked QAM256 18 555000000 Hz -2.3 dBmV 41.0 dB 0 0
3 Locked QAM256 19 561000000 Hz -1.4 dBmV 41.7 dB 0 0
4 Locked QAM256 20 567000000 Hz -1.3 dBmV 41.5 dB 0 0
5 Locked QAM256 21 573000000 Hz -1.8 dBmV 41.1 dB 0 0
6 Locked QAM256 22 579000000 Hz -2.3 dBmV 40.9 dB 0 0
7 Locked QAM256 23 585000000 Hz -2.2 dBmV 41.0 dB 0 0
8 Locked QAM256 24 591000000 Hz -1.8 dBmV 41.2 dB 0 0
9 Locked QAM256 26 597000000 Hz -1.5 dBmV 41.5 dB 0 0
10 Locked QAM256 27 603000000 Hz -1.7 dBmV 41.3 dB 0 0
11 Locked QAM256 28 609000000 Hz -2.3 dBmV 40.9 dB 0 0
12 Locked QAM256 29 615000000 Hz -2.4 dBmV 40.8 dB 0 0
13 Locked QAM256 30 621000000 Hz -2.0 dBmV 40.5 dB 0 0
14 Locked QAM256 31 627000000 Hz -1.6 dBmV 40.4 dB 0 0
15 Locked QAM256 32 633000000 Hz -1.8 dBmV 40.5 dB 0 0
16 Locked QAM256 33 639000000 Hz -2.1 dBmV 40.4 dB 0 0
17 Locked QAM256 34 645000000 Hz -2.2 dBmV 41.4 dB 0 0
18 Locked QAM256 35 651000000 Hz -1.8 dBmV 41.9 dB 0 0
19 Locked QAM256 36 657000000 Hz -1.2 dBmV 42.1 dB 0 0
20 Locked QAM256 37 663000000 Hz -1.6 dBmV 41.9 dB 0 0
21 Locked QAM256 38 669000000 Hz -1.6 dBmV 41.6 dB 0 0
22 Locked QAM256 39 675000000 Hz -1.6 dBmV 41.4 dB 0 0
23 Locked QAM256 40 681000000 Hz -1.5 dBmV 41.7 dB 0 0
24 Locked QAM256 41 687000000 Hz -0.8 dBmV 42.2 dB 0 0
1 Locked ATDMA 6 5120 Ksym/sec 30100000 Hz 46.5 dBmV
2 Locked ATDMA 5 5120 Ksym/sec 36500000 Hz 46.5 dBmV
3 Locked ATDMA 7 5120 Ksym/sec 23700000 Hz 46.5 dBmV
4 Locked ATDMA 8 5120 Ksym/sec 17300000 Hz 46.8 dBmV
↧
[Firmware] Arris S33 - New firmware?
Modem rebooted overnight. New firmware:
TB01.03.001.10_012022_212.S3
Also there's an annoying notice box on the modem's web interface now:
"We recommend using our Mobile Application - SURFboard Central - for better experience configuring and accessing new features customized for your device."
Not sure why I would want to use a phone app to see my modem stats when a web browser does the job fine.
No apparent differences in latency or speed so far.
↧
[Equip] Returned equipment still showing on account despite receipt?
So, Yesterday I returned a XB7 to a Xfinity retail store in person and was handed a receipt. Yes, I am keeping it in a safe place until it's gone.
It appears today it's still appearing on my account? Seems others have had returned equipment stay on their account for 1 - 3 Weeks.
Curious if anybody else has had this here.
↧
New Xfinity Install XB3 vs MB8611
So my new Xfinity internet was just installed this morning. They provided an XB3 since I'm only using the 50/10Mbps plan. I am surprised they are still using DOCSIS 3.0 modems.
This first post will be about the XB3 and I will add another post later today or this weekend after I get the MB8611 up and running (it arrives today).
Here is the connection info:
Index Lock Status Frequency: SNR Power Level Modulation
1 Locked 399.00 MHz 40.95 dB 9.00 dBmV 256 QAM
2 Locked 405.00 MHz 40.37 dB 8.80 dBmV 256 QAM
3 Locked 411.00 MHz 40.95 dB 8.60 dBmV 256 QAM
4 Locked 417.00 MHz 40.95 dB 8.80 dBmV 256 QAM
5 Locked 423.00 MHz 40.37 dB 9.00 dBmV 256 QAM
6 Locked 435.00 MHz 40.37 dB 9.10 dBmV 256 QAM
7 Locked 441.00 MHz 40.95 dB 9.00 dBmV 256 QAM
8 Locked 447.00 MHz 40.95 dB 8.80 dBmV 256 QAM
9 Locked 453.00 MHz 40.95 dB 8.80 dBmV 256 QAM
10 Locked 459.00 MHz 40.37 dB 8.60 dBmV 256 QAM
11 Locked 465.00 MHz 40.37 dB 9.10 dBmV 256 QAM
12 Locked 471.00 MHz 40.37 dB 10.00 dBmV 256 QAM
13 Locked 477.00 MHz 40.95 dB 10.10 dBmV 256 QAM
14 Locked 483.00 MHz 40.95 dB 10.00 dBmV 256 QAM
15 Locked 489.00 MHz 40.95 dB 9.80 dBmV 256 QAM
16 Locked 495.00 MHz 40.95 dB 10.00 dBmV 256 QAM
17 Locked 501.00 MHz 40.95 dB 10.20 dBmV 256 QAM
18 Locked 507.00 MHz 40.37 dB 10.00 dBmV 256 QAM
19 Locked 513.00 MHz 40.95 dB 9.70 dBmV 256 QAM
20 Locked 519.00 MHz 40.95 dB 9.60 dBmV 256 QAM
21 Locked 525.00 MHz 40.95 dB 9.50 dBmV 256 QAM
22 Locked 531.00 MHz 40.95 dB 9.80 dBmV 256 QAM
23 Locked 537.00 MHz 40.95 dB 9.70 dBmV 256 QAM
24 Locked 543.00 MHz 40.95 dB 9.10 dBmV 256 QAM
25 Not Locked
26 Not Locked
27 Not Locked
28 Not Locked
29 Not Locked
30 Not Locked
31 Not Locked
32 Not Locked
Does all that look normal?
So far, speed tests look great at 59/12Mbps as expected but the buffer bloat results were odd. The download buffer bloat is terrible (+60ms) but upload bufferbloat is awesome (+0ms way better than my fiber is).
Any tweaks to be made to improve download buffer bloat?
Thanks.
EDIT: Forgot all the connection info
Upload
Index 1 2 3 4 5 6 7 8
Lock Status Locked Locked Locked Locked Not Locked Not Locked Not Locked Not Locked
Frequency: 16.40 MHz 35.60 MHz 29.20 MHz 22.80 MHz
Symbol Rate 5120 KSym/s 5120 KSym/s 5120 KSym/s 5120 KSym/s
Power Level 39.75 dBmV 38.00 dBmV 38.25 dBmV 38.75 dBmV
Modulation 64 QAM 64 QAM 64 QAM 64 QAM
Channel Type DOCSIS2.0 (ATDMA) DOCSIS2.0 (ATDMA) DOCSIS2.0 (ATDMA) DOCSIS2.0 (ATDMA)
CM Error
Unerrored Codewords Correctable Codewords Uncorrectable Codewords
120266101 8 0
120272831 0 0
120275329 0 0
120280633 10 0
120279543 0 0
120273250 0 0
120279234 10 0
120274283 0 0
120293548 0 0
120278255 0 0
120275694 0 0
120280321 0 0
120277050 0 0
120274658 0 0
120296159 0 0
120300339 0 0
120280831 0 0
120295592 0 0
120300601 0 0
120305253 0 0
120301002 0 0
120310534 0 0
120302394 0 0
120310572 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
↧
↧
CM1000 Unsupported need to be upgraded?
Currently I’m using a CM1000 which I recently learned went EOL back in July last year.
Speed wise I don’t to upgrade yet since we’re on the 600Mb plan and everything works fine. But I was wondering if I need to upgrade to a supported modem or will things run fine for a while?
↧
[E-mail] Email problems
Anyone else having intermittent problems with Comcast email for the past few days? Several threads about it on the Comcast forums. Incoming mail from outside Comcast is often delayed or never makes it.
↧
Comcast/Xfinity Construction ?
Comcast is starting to wire the road that I live on and has marks spray painted all over the road cause it's a all underground build and in front of my house they have a square with MP in the square, is there a meaning for that.
↧
Netgear IPv6 Problems With Comcast
I live in Montgomery County, MD and I currently have the Netgear RAX45 router which is connected to an Arris SB8200 modem. Consistently IPv6 disconnects after an hour or two and the only way to get it back is to reboot the router. I also tried IPv6 with the Netgear R6900P and the Netgear R6300 with the same results. I tried this with a different modem with the same results. Anyone else having IPv6 problems with a Netgear modem?
↧
↧
[Equip] Just a question to see if this can be done.
Years ago I wired a friend's place with cat6 because they only had one thing that needed wireless so they got a Netgear wireless router and used the ethernet ports on the router.
Now he has a bunch of wireless gear that isn't getting good connections so he wants to install a mesh setup for the wireless but will still need the wired connections.
The mesh router he is looking at has one ethernet port in and one out with 3 wireless satellites.
Is it possible to wire the modem into the mesh router then the other port to a 6 port switch for the wired gear?
I have read articles online that are confusing and I always get great answers here.
Thank you.
↧
[DOCSIS] How many of you made the switch to DOCSIS 3.1 with Xfinity?
This is just thread wondering no matter your speed are you using the latest modem with Xfinity since almost all of their plants have DOCSIS 3.1 active now. If so what modems are you all using?
↧
[Speed] Really long record of low speeds
Hi folks,
We currently have the "up to...200mbps" plan. Unfortunately, I have never been able to get above 35mbps and regularly we are stuck around 15mbps with around 2-4 mbps up.
Comcast has come out, re-ran the line from the pole to the house, moved the box on the outside of the house (claimed it was a distance issue from the box into the house), etc. still to no avail. We have the unlimited bandwidth package.
We had the same results on a lower plan as well. We have also swapped the modem 3 times.
↧
Error TVAPP-00114 when they try to use the streaming service
Anyone seeing Error TVAPP-00114 when they try to use the streaming service on a computer?
I found Xfinity form page that people have this issue but I was wondering if there is a fix?
https://forums.xfinity.com/conversations/xfinity-stream-website/error-tvapp00114/62338c2dc0176926fec5591f?page=1
↧
↧
Hardware decision.
I don't really know where to put this, so I'm putting it here.
I'm on the Xfinity Gigabit plan. I have a new Arris S33 modem and a new TP-Link AX55 WiFi/router. No sooner did I get everything up and running did I run into the stories about the TP-Link/Avira debacle.
Now I have a new Motorola MG8702 modem/WiFi/router that Xfinity doesn't know how to provision. The S33 pulls down 950Gbps. And after three hours and two Xfinity agents, the best they can get out of the MG8702 is 2-300Mbps. Ultimately, they gave up and called it Motorola's problem.
Question for the Court of Public Opinion: Persist with the Motorola or rest assured that TP-Link has or will resolve the issue with Avira?
Sorry if this is vague and uninteligible but I have a Comcast headache.
↧
[E-mail] Comcast.net emails on inactive account
Switched to WOW a year ago after 36 yrs. with Comcast. No problems with our 7 comcast.net email addresses until Mar. 20, 2022. All went dead. Managed to log into comcast.net and autoforward 6 of the 7 addresses, but not the primary address. Can't get into that as I think I disassociated my cell phone number as I did the autoforwarding on the other 6 emails. Called Comcast and they say nothing they can do since an inactive account. When I left Comcast, they said the emails would all stay active and they have. Until Saturday. Just need to get into that last primary email and set it to autoforward.
↧
Compare Netgear CM1000 with CM1200
Any particular opinions on one over the other? Replacing a loaner CM700.
Do not need the link aggregation of the CM1200.
↧